Phase Change Materials – Eutectic Thermal Energy Storage Products




Ice Thermal Energy Storage (TES) has the advantage of universal availability, low cost and transport ability by other system elements. However, a traditional ice TES system for air conditioning application requires low temperature chillers and consequently standard water chillers must be replaced with low temperature glycol chillers which function with a lower evaporation temperature and consume more strength.

If we can offer designers an ice which freezes and melts above or below 0°C (32 °F) these new products will open new horizons for environmentally friendly and economical systems for both New and Retrofit kind course of action cooling / heating load shifting applications.

Phase Change Material (PCM) Eutectic solutions are  mixtures of two or more chemicals which, when mixed in a particular ratio, have a halting / melting point below or above water halting temperature of 0 °C (32 °F) and they offer a thermal energy storage facility between -114 °C (-173 °F) and +164 °C (327 °F).

Eutectics are well-known and in fact early applications date back to the late 18th century however the separation and the life expectancy of these mixtures were unpredictable and consequently their wide spread usage was limited.

The disadvantages of a traditional HVAC chiller and ice (water ice) storage system can be conquer by utilising the latent heat capacity of various “Eutectic” mixtures without the need for minus circulation temperatures. 

Phase Change Material (PCM) thermal energy storage not only enables the designer to utilise existing chiller technology but also enables charging by method of free cooling, i.e. without running the chillers

Although the term “Eutectic” is widely used to describe the materials we are interested in, a better description would be “Phase Change Materials” (“PCMs”). Unfortunately, very few of the proven PCM solutions are true Eutectics and so many have to be alternation to acquire a material appropriate for long term use.

PCMs can be broadly grouped into two categories; “Organic Compounds” and “Salt-based Products”. The basic requirement for a alternation Eutectic (PCM) Solution can be classified in three categories, namely stable solution (no separation or degrading), minimum supercooling / heating and finally close halting and melting temperatures.

There are three basic additives commonly used to modify hydrated salt based Eutectic PCM solutions. These three elements are firstly Nucleating Agent which encourages Crystal formation and consequently minimizes super cooling and the secondly additive is Freeze Depressant to unprotected to a lower phase change temperature and thirdly Gelling / Thickening Agent in order to conquer separation and degrading problems.

Once the above elements have been carefully applied, a satisfactory Eutectic PCM Solution can be produced from the physical and thermodynamic point of views and commercially obtainable solutions offer a range of  -114 °C (-173 °F) and +164 °C (327 °F).

However, majority of appropriate PCM solutions for HVAC and refrigeration systems are corrosive to commonly used pipe and line elements and consequently appropriate encapsulation techniques must be applied to conquer this problem while providing the best thermal performance. Various encapsulation techniques such as tube, flat container or alternatively ball concepts have been developed whereby the PCM solutions are encapsulated in plastic and / or metal shell.

The heat move between the surrounding media, which flows around or inside the unit and the surrounding PCM solutions, takes place from the outer or inner or the combination of both surfaces of the encapsulated PCM unit. These techniques are generally eliminates the contamination risk and offers an efficient, cost effective, functional and flexible new kind of TES designs.

Modern society’s reliance on refrigeration and air conditioning indicates that refrigeration and the associated environmental issues will be with us for a important time and consequently one has to utilize existing and obtainable different technologies with minimum usage of energy.

A Positive Temperature Eutectic Phase Change Material (PCM) Thermal Energy Storage (TES) not only provides the end user with an Environmentally Friendly design but also the following additional benefits can be obtained:

o Reduced Equipment Size
o Capital Cost Saving
o Energy Cost Saving
o Environmentally Friendly Installation
o Improved System Operation
o Flexibility for the Future Capacities

The temperature ranges offered by the hypothesizedv PCM solutions utilize traditional chilled water temperature ranges for both the charging and discharging sides of the system. Hence, they can be applied to any new or retrofit application with minimal technical and economical impacts.

Furthermore, the possibility of Free Cooling Cycle, Absorption Chillers, Co-Generation, Solar, Hot Water and Heat Recovery TES system combinations offer new horizons for designers to control the energy balance to match the load and electricity need / consumption of the system as a whole.

The task for designers is to analyze all obtainable technologies towards achieving improved efficiency in spite of of which refrigerant is used, and apply where and when possible diversification technologies in order to minimize the overall CO2 emission related to energy usage. A carefully balanced Eutectic, Phase Change Material (PCM) Thermal Energy Storage (TES) may be the answer for some of the cooling applications for an Environmentally Friendly and Economical different.




leave your comment

Top