Heating a Garden Building, Outdoor Office, Summerhouse or Posh discarded

Heating a Garden Building, Outdoor Office, Summerhouse or Posh discarded

The garden building business is blooming booming!

Thanks to technological advances aiding mobile communications and the ever-increasing costs of commuting, many of us are opting to work from home. A self-contained office in the garden provides the perfect ecosystem to do just that.

The downturn in the economy has also played its part in the garden building expansion. Financial uncertainty has resulted in a reluctance to move house, with homeowners choosing to stay put and enhance and/or extend similarities. In some situations this has led to the introduction of a garden building, whether used as a garden room, summerhouse or kids’ den.

To get the maximum use from a garden building, heating (along with light and strength) is a must. If the building isn’t warm and cosy, then it won’t be used, particularly in the colder winter months. This article looks at factors to consider when it comes to heating your garden building.

Insulation is meaningful

Is there adequate insulation? Some, but not all purpose-built garden rooms, are adequately insulated. If you have converted a discarded or outbuilding, or opted for a lower cost garden building, then you will probably need to add insulation. Without this, the cost of heating could be extremely expensive.

Add Heating

In order for any garden building to be comfortable and useable (for more than just storage), all year round, it will need to be heated.

So what factors should you consider when choosing heating for a garden building?

  • Heat output – when choosing any form of heating it is basic that the option you select has the capacity to adequately heat the space. If in doubt, oversize the heater, as you can always turn it down.
  • Thermostatic control – choosing a heating option with a thermostat will ensure that your garden building is heated optimally at a continued and comfortable temperature. Thermostatic controls provide efficient and cost- effective use of strength; for example, they can turn off a heater when the room has reached its optimum temperature; perfect on a sunny day for taking advantage of any “free heat” from the sun. By maintaining the temperature above a certain minimum level, you protect the contents of the building, including computers and soft furnishings, from cold or damp related damage.
  • Timer – by opting for a product with a timer, you can ensure that the heating is on when it needs to be. A timer allows you to set the heating to come on just before you start your day, ensuring a toasty office in time for when you arrive.
  • Space – by their very character, many outbuildings are small in size. consequently space is often a basic factor in choosing your heating option. These days, radiators are obtainable in unusually thin or low sizes, so there is likely to be something to adjust to already the most awkward of wall spaces. There are also floor-standing heaters, which are portable and take up no wall space.
  • Budget – it may seem obvious, but costs vary immensely on heating options for garden buildings. for example, the price of an electric heater can range from £20 for a basic fan heater to £2000 for the ultimate designer form. Take account of installation costs in addition, for example if you opt for electric underfloor heating, bear in mind that installation costs may be important, especially if the floor needs to be taken up to allow the electric foil mat to be fitted underneath.
  • Aesthetics – Whether your new space is for living or working, in addition as wanting a comfortable and functional ecosystem, you may also want to add style with an attractive looking heater; the many designs now obtainable average you can choose minimalism to aid focus, bright colours for inspiration or soft curves to give a relaxed feel.

So what are the different heating options obtainable for garden buildings?


Water and oil filled electric radiators

The water inside a water-filled electric radiator is heated by an electric component and is used as a heat reservoir. Oil-filled electric radiators are heated electrically; the oil is not burnt but again is used as a heat reservoir. Both types of electric radiators work on the same rule and have similar running costs.


  • Wall mounted and floor standing models obtainable;
  • Many floor mounted versions can be plugged into a socket, so there are no installation costs and the radiators are often portable;
  • Wide range of current and traditional styles obtainable. From minimalist sleek designs like the Electric Royce (which is made of lightweight aluminium), to typical column style cast iron radiators like the Electric Etonian;
  • Many are obtainable with timers and thermostats; and
  • Some styles heat up quickly (particularly those made of lightweight aluminium); others cool down slowly (such as those made of cast iron).


  • The wall-mounted versions don’t sit as close to the wall as some of the electric radiant panel radiators currently on the market.

Electric radiant panel radiators

Electric panel radiators radiate heat (instead of convecting it) and don’t contain any liquid. These radiators have become extremely popular in recent times, due to their efficient, environmental and functional qualities. One of the best electric panel radiators around is the iRad from characterize Radiators, which is beautifully designed, slim, flat and sits close to the wall.


  • Lightweight;
  • Sits close to the wall;
  • Many sizes, finishes and colours obtainable;
  • Heats up quickly;
  • Radiates warmth without “blowing”;
  • Warms both objects and the surrounding air;
  • obtainable with thermostats and timers; and
  • Precise, focused, highly efficient heating.


  • Almost always wall-mounted, so there will need to be at the minimum some wall space obtainable.

Wood burners

A wood-burning stove burns wood fuel and wood-derived biomass fuel whilst creating heat.


  • Lovely cosy feel with attractive real fire flame;
  • Carbon neutral, if fuel comes from sustainable supplies;
  • Warms both objects and the surrounding air; and
  • comparatively low running costs.


  • without of controllability, which can rule to high temperatures;
  • Sourcing and moving around fuel can be difficult and messy;
  • Demands time and effort on a daily basis to keep it running;
  • Ash produced needs to be cleaned up;
  • Requires reasonable amount of space, taking up both wall and floor space; and
  • meaningful installation costs.

Fan heaters

A fan heater works by passing air over a heating component, this heats up the air, which then leaves the heater, warming up the surrounding room.


  • Heats up aroomquickly;
  • Warms both objects and the surrounding air;
  • comparatively small so doesn’t take up much floor space; and
  • No installation costs.


  • As soon as its switched off, the room will cool down quickly;
  • Fan creates noise;
  • Often unattractive;
  • Uses a lot of energy resulting in high running costs; and
  • Heat is blown out instead of convected or radiated, which can create a stuffy and snoozy ecosystem.

Infrared heating panels

Infrared heating panels are a comparatively new idea in the UK but have been widely obtainable in Europe for more than ten years. Infrared heaters heat by the use of infrared groups.


  • Focused heating, infrared groups only heat what they hit;
  • Provide heat rapidly;
  • Reasonably efficient to run;
  • Can be fitted onto the ceiling to keep them out of the way; and
  • Thermostats and timers obtainable.


  • Only heat the objects that the infrared groups hit. If you sit facing an infrared heater, then the back of your body and head and any part below the heater will keep cold;
  • The surrounding air is not heated at all; and
  • possible fire danger – As this heating is focused and direct, there may be a risk of fire if the heater is placed too close to an object. For example, if an infrared heater fell onto a wood floor.

Electric underfloor heating

Electric underfloor heating consists of a foil heat mat containing heating wires, which warm the floor surface which in turn heats the air above it. The foil mat must be laid under the laminate or wooden flooring intended for the garden building.


  • No wall space required;
  • Nice feeling under foot;
  • When working to an optimum, whole room is uniformly heated with an ambient background temperature;
  • Many are obtainable with thermostats and timers; and
  • comparatively low running costs.


  • May not have sufficient capacity to provide adequate heat for building – depending on level of insulation, ceiling height, and amount of glass;
  • comparatively high installation costs;
  • Insulated floor required;
  • Must be installed under the floor, so may not be a desirable option where the flooring is already down;
  • Slow to respond, can take up to 3 hours to get up to temperature, so forward planning needed and can take a long time to cool down;
  • Limits choice of floor-coverings; and
  • If it fails, the cost and inconvenience of repair will be meaningful, as flooring may need to be removed or replaced.

Portable gas heaters

Historically, a popular option for heating rooms or outbuildings particularly where there was no strength source. strength is provided to these heaters via gas bottles that sit at the bottom of the heater.


  • High heat output;
  • Self contained heaters, requiring no external strength source;
  • No installation charges; and
  • Portable.


  • Safety – you must not place items on top or directly in front of gas heaters. This may be a challenge if you are working in a small space;
  • Unpleasant gas odour;
  • Adequate ventilation is vital to prevent a build up of dangerous fumes;
  • Risk of carbon monoxide leak; and
  • Large bulky items taking up valuable space, both when in use and in storage.


at all event kind of garden room heating you choose, you must ensure that it has the capacity to heat the applicable space. It is important to maximize the strength used to efficiently provide heat whilst minimizing energy wastage by the use of good insulation, timers and thermostats.

Bear in mind that these days having a comfortable warm outbuilding doesn’t average you need to compromise on style with ugly, bulky and/or ineffective heating options. There is now a wide range of stylish, safe however efficient electric heating solutions obtainable.

For more information on finding the most appropriate heating product for your garden building, speak to a radiator or heating expert.

leave your comment